Water Booster System - 115VThe Flojet 2840 Series Booster Systems are designed to provide a constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 gpm at 10 psi (0.7 bar). The pump is fully automatic, with built in inlet strainer, pressure switch and check valve, and ..
Water Booster SystemThe Flojet 2840 Series Booster Systems are designed to provide a constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 gpm at 10 psi (0.7 bar). The pump is fully automatic, with built in inlet strainer, pressure switch and check valve, and supplie..
1" Electro-Magnetic Clutch PumpFlow rate: Nominal 23 US Gallons/min at 1750 RPMSelf-priming from dry up to 7.8ftFeatures: Constructed from marine quality bronze and stainless steel for ruggedness and reliability.Easy to service and maintain.Inexpensive to buy and operate.Will tolerate abrasive wear ..
Ballast PumpThis Wake/Surf boat Ballast pump is the same one utilized by most major boat builders. The Jabsco pump comes standard with a green Run Dry Impeller. This pump has the standard electrical quick connector installed. Just connect your hoses, mount the pump into the boat, in its orginal posi..
Bronze AC Motor Pump UnitFlow rate: up to 9.6 USgpm, maximum head 40ft (17.3psi)Self-priming from dry up to 7.8ftFeatures: Easy to service and maintain.Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).Handles hard and soft solids without clogging.Non puls..
Commercial Duty Water PuppyFlow rate: 34 litres/min (9 USgallons/min)Self-priming from dry up to 1.2m (4ft)Features:Small bilge debris present no problem to these bronze bodied, flexible impeller pumps.Simple design means fewer wearing parts.ISO 8846 MARINE (Ignition protection).ISO 8849 MARINE (Bil..
Commercial Duty Water PuppyFlow rate: 34 litres/min (9 USgallons/min)Self-priming from dry up to 1.2m (4ft)Features:Small bilge debris present no problem to these bronze bodied, flexible impeller pumps.Simple design means fewer wearing parts.ISO 8846 MARINE (Ignition protection).ISO 8849 MARINE (Bil..
Engine Oil Drain PumpPolished brass hand pump connects directly to engine oil dipstick tube on many popular marine engines such as OMC and MercruiserScrews onto threaded male 3/4" garden hose (GHT) fitting on top of dipstick tube.Gives simple "one-hand" pumpingComplete with 2ft of 1/2" ID drain hose..